Modify A Fixture Profile; Delete A Fixture Profile - iSolution IL-2420 Manuel D'utilisation

9. Repeat steps 3-4 to build 50 FIXTURE PROFILE mas.
10. Back to the last menu please press ESC/CLEAR button.

5.2 Modify a Fixture Profile

1. Enter Menu Mode.
2. Turn jog wheel #1 up to when the 02.Modif a Fixture is shown on the
monitor ， p ress ENTER/MAIN MENU Button to enter.
3. Use Jog wheel #3 to chose the bank of other manufacturers, and Jog
wheel #4 to chose the ACME's.
4. Press ENTER/MAIN MENU
5. Use Jog wheel #2 and #4 to change the name of the FIXTURE. Turn Jog
wheel #2 to change the position of the cursor, and Jog wheel #4 should
change the trait of the channel. The amount of the letters must be below 26,
it can be include ten numbers ， o ne "—", the length of the Fixture name
should be below 16, and it must be begin with letters.
6. Press ENTER/MAIN MENU Button to change the trait of the channel.
7. Use Jog wheel #2 and #4 to change the name of the FIXTURE. Turn Jog
wheel #2 to change the position of the cursor, and Jog wheel #4 should
change the trait of the channel
button to enter.
90-
8. Repeat 3-7 to change other FIXTURE PROFILE.
9. Back to the last menu please press ESC/CLEAR button.

5.3 Delete a Fixture Profile

1. Enter Menu Mode.
2. Turn jog wheel #1 up to when the 03.Delete a Fixture is shown on the
monitor press ENTER/MAIN MENU Button to enter.
3. Use Jog wheel #3 to delete the profile of other manufacturers, and Jog
wheel #4 to delete the ACME's.
4. Press ENTER/MAIN MENU Button to enter and LCD will show "NO".
5. Turn Jog wheel #1 to chose "Yes".
6. Press ENTER/MAIN MENU Button, all LEDs shaking for 3 times means
success.
7. Repeat 3-6 to delete other FIXTURE PROFILE.
8. Back to the last menu please press ESC/CLEAR button.
91-