Override Editing; Program A Cue - iSolution IL-2420 Manuel D'utilisation

7. Press the number button 1-20 to select the to be stored Override number,
all LEDs blink for 3 times to indicate that you have successfully preset an
Override effect.
8. Repeat steps 2-7 to program other Override effects.
9. Press PROGRAM button for 3 seconds to exit Program mode, the LED
goes out indicating this operation.

4.21 Override Editing

1. Enter Program mode.
2. Press OVERRIDE button.
3. Press number Button 1-20 to select the Override number to be edited.
4. Press FIXTURE button.
5. Press the number button 1-20 to select the concerned fixtures to be
edited with Override.
6. Use FADERS1-24 and 4 Jog wheels to adjust the selected fixture to your
desired effect.
7. Press MANUAL/REC button, at this moment, all LEDs on CUE 、
OVERRIDE 、 C ENTER 、 F IXTURE GROUP 、 P RESET 、 C HASE 、 B ANK 、
BLACKOUT blink at the same time.
8. Press OVERRIDE button.
84-
9. Press the number button 1-20 to select the Override number you chose in
step 2, all LEDs blink for 3 times to indicate that you have successfully edited
an Override effect.
10. Press PROGRAM button for 3 seconds to exit Program mode, the LED
goes out indicating this operation.
Note: If you press different buttons in step 3 and 9, the Override you set in
step 3 will cover the one in step 9.

4.22 Program a CUE

1. Enter Program mode.
2. Press CUE button use jog wheel #1 to select the page number.
3. Press the number button 1-20 to select the to be stored CUE number, at
this moment, all LEDs on CHASE are lit and all LEDs on the number button
which have saved CHASE will blink. Turn jog wheel #1 should change the
page number.
4. Press the number button 1-20 to select the Chase number which is to be
stored to CUE, the LEDs on the chosen number buttons will be lit.
5. Press MANUAL/REC button, all LEDs blink for 3 times to indicate that
you have successfully stored a CUE.
6. Repeat steps 4-6 to store more CUEs.
7. Press PROGRAM button for 3 seconds to exit Program mode, the LED
goes out indicating this operation.
85-