Product Marking Label; Marking Label On Sheet Metal - Videotec EXH Manuel D'instructions

4.6 Product marking label

Before proceeding further with installation, make sure the material supplied corresponds to the
order specification by examining the marking labels.
The marking label on the product is made on sheet metal or on an adhesive label.

4.6.1 Marking label on sheet metal

02
03
06
07
08
09
10
Fig. 1
1. The number of the accredited body that provides the quality assessment.
2. Manufacturer's name and address.
3. Model identification code.
4. Ambient temperature of use
5. Serial number (the serial number are 12 numeric characters, the second and the third digits define the last
two numbers of the year of manufacture)
6. Electrical characteristics: supply voltage (V), frequency (Hz), current consumption (A), power consumption
(W).
7. Power consumption camera/lens (W).
8. ATEX certification.
9. IECEx certification.
10. Warnings.
MNVCEXH_2104_EN
01
05
04
9