Starting Procedure - Williams SportJet 345 Mode D'emploi

Starting Procedure

Sportjet 345, 395 & 435
1 Turn battery isolator on (see page 12).
2 Run bilge blower for 5 minutes.
3 Secure any loose ropes that could get
sucked into the jet unit.
4 Ensure the shift lever is in neutral position.
5 Connect kill cord to switch.
WARNING. Personal injury may
result if not attached.
6 Turn key to start.
7 Test kill cord for correct functionality
(see Safety Check! section, opposite).
Sportjet 460 & 520
1 Turn key switch to ON position.
2 Run bilge blower for 5 minutes.
3 Secure any loose ropes that could get
sucked into the jet unit.
4 Ensure the shift lever is in neutral position.
5 Connect kill cord to switch.
WARNING. Personal injury may
result if not attached.
6 Press start/stop button to start engine.
7 Test kill cord for correct functionality
(see Safety Check! section, opposite).
1
2
3
1
Bilge blower switch
2 Bilge pump switch
3 Navigation light switch
3
4
2 1
1 Battery isolator/ignition key
2 Engine start/stop button
3 Bilge blower switch
4 Music system switch (if fitted)
5 Navigation light switch
6 Bilge pump switch
5
6
17