Sportjet - Williams SportJet 345 Mode D'emploi

Lifting the Sportjet
Instructions for the correct use of lifting strops are
contained in the strop bag; please read these
carefully.
CAUTION. Damage to the tender may
result if the following procedure is
not adopted.
Tilt helm down before attempting to
lift the Sportjet (460 and 520 only)
when using standard Williams-
supplied lifting strops. Lifting
strops are available as an
optional accessory. Ensure
fastenings are attached correctly
before lifting.
WARNING. Risk of injury or death. When Williams lifting strops are used
please refer to instructions supplied with the strops and adhere to the Safe Working Load
values as follows: All Sportjet models: 750 kg max
Reboarding the Sportjet
1 Ensure engine is off and kill cord is
removed.
2 Lift up retaining flap and pull out ladder
from underside of transom.
3 Ensure ladder is fully extended.
4 Climb ladder to access the bathing
platform.
5 Ensure ladder is stowed with the retaining
flap folded down before moving off.
23