Nailer Operation - Hitachi NR 90AD Manuel D'instructions Et De Sécurité

(2) Slide the nail strip forward in the
magazine.
The nail strip should pass the nail
stopper.
(3) Pull the nail feeder (B) back to engage
the nail feeder (A) to the nail strip.
Nail Feeder (A)
NOTE:
● Quietly push the Nail Feeders (A) and (B)
against the nail.
If the Nail Feeders (A) and (B) are released
from backward the magazine and bumped
against the nail, the connecting paper of
the nail can be damaged.
● Use nail strip of more than 5 nails.
The Nailer is now ready to operate.
Nail Stopper
Nail Feeder (B)
5
Removing the nails:
1 Pull the nail feeder (B) backward.
2 Return the nail feeder (B) forward quietly
while pushing the nail feeder (A).
3 Push the nail stopper toward the
magazine side, and pull out nails from
the back of the magazine.
Nails

NAILER OPERATION

Read section titled "SAFETY"(pages 4 – 7).
DANGER
● Operators and others in
WARNING
English
1
Nail Feeder (A)
2
Nail Feeder (B)
Nail Stopper
3
work area MUST wear
safety glasses with side
shields which conforms
to ANSI Z87.1
specifications.
● NEVER point tool
at yourself or
others in work
area.
15