Risk Of Electric Shock - SilverCrest SSJBK 300 B2 Mode D'emploi

Defective components must always be replaced with original
■
replacement parts. Compliance with safety requirements can
only be guaranteed if original replacement parts are used.
Risk of injury if appliance is misused! Use only as instructed.
■
NEVER use the appliance near naked flames, a hotplate or a
■
heated oven.
Install the appliance as close as possible to an electrical power
■
socket. Ensure that the plug on the mains cable is easily accessible
in case of emergency, and that there is no risk of
tripping over the cable.
Provide a stable location for the appliance.
■

RISK OF ELECTRIC SHOCK!

The appliance should only be connected to correctly installed
►
and earthed mains power sockets. Ensure that the rating for
your local power supply corresponds with the details on the
rating plate of the appliance.
To avoid potential risks, damaged mains cables should be
►
replaced by the manufacturer, their customer service depart-
ment or a similarly qualified person.
Do not expose the appliance to rain, and never use it in a
►
humid or wet environment.
Ensure that the power cable never becomes wet or moist
►
during use.
Never immerse the base of the machine in water or other
►
liquids! There is a risk of a potentially fatal electric shock if
residual moisture comes into contact with live components
during operation.
SSJBK 300 B2
GB │ IE │
5 ■