Gardol G125-85F Manuel D'utilisation page 27

Dimensions
Length with cutting unit, mm/ft
Width with cutting unit, mm/ft
Height, cm/in
Machine with empty tanks, kg/lb
Wheel base, mm/ft
Tyre size, front
Tyre size, back
Air pressure, rear - front, kPa / bar / PSI
Engine
Brand / Model
Nominal engine output, kW (see note 1)
3
Displacement, cm /cu.in
Max.motor speed, r/min
Fuel, minimum octane grade lead-free
Fuel tank capacity, litre
Oil, class SJ-CF
Oil tank capacity, litre/USqt
Starting
Electrical system
Type
Battery
Spark plug
Electrode gap, mm/inch
Main fuse
Noise emissions and cutting width
(see note 2)
Sound power level, measured dB(A)
Sound power level, guaranteed dB(A)
Cutting width, cm/inch
Sound levels
(see note 3)
Sound pressure level at the operators ear, dB(A)
Vibration levels
(see note 4)
Vibration level on the steering wheel, m/s
Vibration level in the seat, m/s
Transmission
Brand
Lubricant
Number of forward gears
Number of reverse gears
Forward speed, km/h.
Reverse speed, km/h
Cutting unit
Type
Cutting heights, 5 positions, mm/inch
Blade
Article number
Blade length, mm/inch
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the engine model
measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed on
the final machine will depend on the operating speed, environmental conditions and other values.
Note 2: Noise emissions in the environment measured as sound power (L
Note 3: Noise pressure level according to EN 836. Reported data for noise pressure level has a typical statistical dispersion (standard deviation)
of 1.2 dB(A).
Note 4: Vibration level according to EN 836. Reported data for vibration level has a typical statistical dispersion (standard deviation) of 0.2 m/s
2
(steering wheel) and 0.8 m/s (seat).
IMPORTANT! When the service life of this product has been served and it is no longer used it should be returned to the dealer or to an applicable
station for recycling.
IMPORTANT! We reserve the right to change specifications and designs without prior notice so as to implement improvements. Note that no legal
claims are valid on the basis of information in this manual. Use only genuine parts for repairs. The warranty is not valid if non genuine parts are
used.
TECHNICAL DATA
2
2
G125-85F
2057 / 6,75
1029 / 3,38
107 / 42
190 / 419
800/2.62
16*6-10
13*5-8
80/0,8/11,6
Briggs & Stratton / 3125
6,5
344/21
2900 ± 100
85
3,3
SAE 5W/30 or SAE 10W/30
1,4/1,5
Electric starter
12 V, negative earthed
12 V, 18 Ah
Champion QC12YC
0,75/0,030
Flat pin, 15 A.
98
99
85/33,5
83
1,6
0,9
Topec T7000
SAE 80W-90
3
1
0-8
0-4
Mulching
25-70 / 1-2 3/4
5810835-01
491 / 19,33
) in conformity with EC directive 2000/14/EC.
WA
2
– 135
English