Vulcan GHCB40C Manuel D'installation Et D'utilisation page 8

DRAFT HOOD INSTALLATION - GHCB40 OR GHCB44
All GHCB40's and GHCB44's come equipped with a hood flue diverter that is packaged and laying in
the top broiler compartment. This flue diverter must be attached to the unit at the time of installation,
following the steps below:
1. If the diverter has protective plastic covering the assembly, remove all the plastic.
2. Place the diverter on top of the unit covering the flue (Fig. 4).
3. Remove four 10-24 sheet metal screws from the top rear flange of the broiler (Fig. 5).
4. Align the four holes/slots in the rear flange of the diverter with the holes in the rear top flange
of broiler, and reinstall four 10-24 sheet metal screws (Fig. 6).
5. Diverter installation is now complete (Fig. 7).
HOOD
FLUE
DIVERTER
FLUE
PL-41719-1
Fig. 4
PL-41721
Fig. 6
– 8 –
SCREWS
Fig. 5
PL-41722
Fig. 7
PL-41720-1