Vulcan GHCB40C Manuel D'installation Et D'utilisation page 18

Pilot Burner Adjustment
Turn the pilot burner B valve ON. The valve is located in the lower compartment.
Each burner is provided with a standing pilot burner. Adjust the pilot flame to approximately a
/ " (19 mm) flame length. The adjusting valve is installed in the inlet of the pilot burner manifold, located
3
4
behind the removable front panel above the grid area (Fig. 20).
PILOT BURNER ADJUSTMENT VALVE
BURNER ORIFICE TIP
HI-LOW VALVE
PL-41733-1
Fig. 20
– 18 –