Vulcan GHCB40C Manuel D'installation Et D'utilisation page 17

LIGHTING INSTRUCTIONS - MODELS IR2 AND IR44 (INFRARED)
1. Remove burner box cover.
2. Turn gas supply ON.
3. Turn pilot burner B valve (located in the lower left-hand compartment) (Fig. 18) ON and light
pilots (one pilot per burner) with a taper (Fig. 19).
4. If the pilots go out, turn B valve (Fig. 18) OFF and wait 5 minutes, then repeat Step 3.
BURNER B VALVE
TOGGLE SWITCH
INDICATOR LIGHT
PL-41731-1
PL-41732
Fig. 18 Fig. 19
– 17 –