Product Overview - Toro Power Plex 40V MAX Manuel De L'utilisateur

Product Overview

Specifications
Appropriate Temperature Ranges
Charge the battery at
Use products at
Store products at
Unplug the charger if
*Charging time will increase if you do not charge the
battery within this range.
Store the tool, battery pack, and battery charger in an
enclosed clean, dry area.
0°C (32°F) to 40°C (104°F)*
-15°C (5°F) to 60°C (140°F)
-15°C (5°F) to 60°C (140°F)
Below 0°C (32°F) or above
40°C (104°F)
Operation
WARNING
The blower can throw debris, possibly
causing serious personal injury to you or
bystanders.
• Do not blow hard objects, such as nails,
bolts, or rocks.
• Do not operate the blower near bystanders
or pets.
• Use extra care when cleaning debris from
stairs or other tight areas.
• Wear safety goggles or other suitable eye
protection, long pants, and shoes.
Starting the Blower
1. Make sure that the vents on the blower are clear
of any dust and debris.
2. To start the blower, squeeze the variable-speed
trigger (Figure
Note:
Engage the speed lock to keep the
machine on without pressing the variable-speed
trigger (Figure
1. Speed lock
2. Turbo boost button
3. Variable-speed trigger
Adjusting the Air Speed of
the Blower
To accelerate the blower speed, press and hold the
turbo boost button for the desired amount of time
(Figure 4).
7
4).
4).
Figure 4
4. Battery latch
5. Blower venting areas
g194437