General; Declaration Of Compliance; Preface; Proper Use - Homa Sanistar C Manuel D'instructions Original

1. General

1.1. Declaration of compliance

EC declaration of compliance according to the ECMa-
chinery Directive 2006/42 / EC, Annex II Part 1A
Manufacturer name and address:
HOMA Pumpenfabrik GmbH
Industriestrasse 1
53819 Neunkirchen - Seelscheid
We hereby declare that the machine:
Sanistar C
follows relevant regulations:
Machinery Directive 2006/42 / EC
Construction Products Regulation 305/2011 / EC
Applied harmonized standards, the reference has been
published in the EU Official Journal:
DIN EN 12050-1 05/2015 Wastewater lifting plants for buildings
and land drainage - construction and
testing - Part 1: sewage lifting units
Person responsible for compiling the technical file:
Vassilios Petridis
Head of Development and Production
HOMA Pumpenfabrik GmbH
This EC Declaration of Conformity was issued:
Oberheister, 27/01/2020
Vassilios Petridis
Head of Development and Production
HOMA Pumpenfabrik GmbH

1.2. Preface

Dear Customer,
Thank you for choosing one of our company's products.
You have purchased a product which has been manufac-
tured to the latest technical standards. Read this operat-
ing and maintenance manual carefully before you first use
it. This is the only way to ensure that the product is safely
and economically used.
The documentation contains all the necessary specifica-
tions for the product, allowing you to use it properly. In
addition, you will also find information on how to recog-
nize potential dangers, reduce repair costs and downtime,
and increase the reliability and working life of the product.
All safety requirements and specific manufacturer's re-
quirements must be fulfilled before the product is put into
operation. This operating and maintenance manual supple-
ments any existing national regulations on industrial safety
and accident prevention. This manual must also be acces-
sible to personnel at all times and also be made available
where the product is used.

1.3. Proper use

The HOMA products comply with the valid safety regula-
tions and meet the demands of state-of-the-art technolo-
gy. In the event of improper use, there is a danger to life for
the user as well as for third parties. Moreover, the product
and/or attachments may be damaged or destroyed.
It is important to ensure that the product is only operated
in technically perfect condition and as intended.
To do so, follow the operating instructions.

1.4. Copyright

This operation and maintenance manual has been copy-
righted by the manufacturer. This operation and mainte-
nance handbook is intended for the use by assembly, op-
erating and maintenance personnel. It contains technical
specifications and diagrams which may not be reproduced
or distributed, either completely or in part, or used for any
other purpose without the expressed consent of the man-
ufacturer.

1.5. Warranty

Costs for removal and installation of the complained prod-
uct at the installation place, costs for the ride of the mech-
anicians to the location and from the installation place as
well as costs for transport are not components of our war-
ranty. Hereby arose costs, especially costs for checking
and transport are bearing by the sender or operator of the
pump. This is also valid for an asserted warranty claim if
a check results that the unit works faultless and is free of
defects. All products have a high quality standard. Each
product is defeated by a strict technical end control before
delivery.
A warranty repair achieved by us does not extend the war-
ranty period. Replaced spare parts give no reasons for a
new warranty period. Extensive claims are excluded, es-
pecially such as diminution, change or compensation also
for any kind of follow up damages.
ENGLISH | 15