Intended Use; Using The Product Safely - TechniSat Techniradio 5 IR Mode D'emploi

Masquer les pouces Voir aussi pour Techniradio 5 IR:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.2 Intended use

The TECHNIRADIO 5 IR has been developed for the reception of DAB+/FM/Internet
radio stations.
The device has been designed for private use and not for commercial purposes.

3.3 Using the product safely

Please take note of the following information to minimise safety risks, to prevent
damage to the device and to make a contribution to environmental protection.
Please read all of the safety information carefully and keep it for future reference.
Always follow all warnings and instructions in this instruction manual and on the back
of the device.
WARNING!
Never open the device!
Touching live parts can be fatal!
WARNING!
Risk of suffocation! Keep packaging and parts thereof away from children. Risk
of suffocation from films and other packaging materials.
Observe all of the following instructions for the intended use of the device and
to prevent damage to the device and injury to persons.
-
Do not repair the device yourself. Repairs should only be carried out by trained
experts. Contact our customer service department.
-
The device should only be operated under the intended environmental
conditions.
-
Do not expose the device to dripping or splashing water. If water has
penetrated the device, switch it off and inform the Service department.
-
Do not expose the device to heat sources which could heat it up more than
normal use will.
-
If you detect a device defect, odour or smoke, a major malfunction, or damage
to the housing, inform the Service department immediately.
-
The device must only be operated using the supplied mains adapter. Never try
to operate the device at any another voltage.
-
If the device shows signs of damage, it must not be put into operation.
-
Do not put the device into operation in the vicinity of bath tubs, showers,
swimming pools or running/splashing water. There is a risk of electric shock
and/or device defects.
PL
41

Publicité

Table des Matières
loading

Table des Matières