Sub Function; Plasma Purification(Optional); Auto Clean (Optional) - LG ATNQ50GMLA4 Manuel Du Propriétaire

SUB FUNCTION

20
SUB FUNCTION
Plasma Purification(Optional)
P P LASMA Purification only

Auto Clean (Optional)

T T his function operate when the unit is turned off.
1
Press the FUNCTION SETTING button 1 time.
Auto Clean symbol will blink.
2
Press the SET/CLEAR button to reserve or cancel the Auto Clean function.
If the Auto Clean function is reserved, whenever the unit is turned off,
the indoor fan is still running for about 30 minutes internally without
cooling or dehumidification operation. Also the louver is closed.
This dries up any remains of moisture & cleans the unit internally.
1
Press the ON/OFF button.
The unit will respond with beep sound.
2
Press the PLASMA button. Plasma
Purification will start when the button is
pressed and stop when the button is
pressed again.
If you press the PLASMA button, Plasma
Purification operates.
• Plasma filter is a technology developed by LG to
get rid of microscopic contaminants in the intake
air generating a plasma of high charge electrons.
This plasma kills and destroys the contaminants
completely to provide clean and hygienic air.
• This function can be used in any operation mode
and any fan speed can be used while plasma filter
is functioning.