Owner'sinstruction; Cooling Mode - Standard Operation; Cooling Mode - Power Cooling - LG ATNQ50GMLA4 Manuel Du Propriétaire

OWNER'S INSTRUCTION

Cooling Mode - Standard Operation

Cooling Mode - Power Cooling

1
Press the ON/OFF button.
The unit will respond with beep sound.
2
Press MODE button to select Cooling Mode.
3
Set the desired temperature by pressing
TEMP button.
Press ROOM TEMPERATURE CHECKING
button to check the room temperature.
When setting the desired temperature is
higher than room temperature, cooling
wind isn't blow out.
* Setting Temp. Range : 18~30 °C(64~86 °F)
1
Press the ON/OFF button.
The unit will respond with beep sound.
2
Press MODE button to select Cooling Mode.
3
Press the JET COOL button. The unit will operate in
super high fan speed in cooling mode.
* Wall mounted models operate power cooling mode
for 30 minutes.
4
To cancel the Power cooling Mode press the Jet Cool button or the
fan button or the room temperature setting button again and the
unit will operate in high fan speed in cooling mode.
or
OWNER'S INSTRUCTION
To raise the temperature
To lower the temperature
or
11