Change Of Door Opening Direction - AEG A 60120 GS4 Notice D'utilisation

Masquer les pouces Voir aussi pour A 60120 GS4:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

G G B B

Change of door opening direction

Should the setting-up place or handling demand it, door-opening direction can
be refitted from right-handed to left-handed.
Following operations are to be done on the
basis of figures and explanations:
Pull out the plug from the mains socket.
Tilt back the appliance carefully being careful
so that the compressor can not touch the floor.
It is recommended to ask another person for
help, who can keep the appliance at this
position safely.
Unscrew the adjustable feet situated on both
sides (2 pieces), in addition the screws fixing the lower door holders (2 pieces)
respectively the screw on the other side.
Take off the freezer door by pulling it slightly
downwards.
Unscrew the top door hinge pin of the
refrigerator then screw it back on the other
side.
Fit the freezer door on the upper door hinge
pin.
Put over the pin in the lower door holding plate
in the direction of the arrow.
Fix the plate on the other side leaving the
position of the door unchanged.
Then screw in the one screw in the place set
free on the other side as
well
as
the
adjustable feet (2 pieces) and set up the box.
Put over the handles on the other side and put
the plastic covering nails supplied in the plastic
bag of this instruction book into the holes set
free.
Put the appliance to its place, set it level and plug it into the mains socket.
In case you do not want to perform the procedures above, call the nearest
brand-mark service. Technicians will accomplish the refitting expertly for
charge.
67

Publicité

Table des Matières
loading

Table des Matières