Your Appliance Needs Air; Rear Spacers; Rehingeing The Door - AEG ARCTIS 70250-2 GS Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Your appliance needs air

For safety reasons, minimum
ventilationmust be as shown Fig.
Attention:
openings clear of obstruction;

Rear spacers

In the bag with the documentation,
there are two spacers which must be
fitted.
Slacken the screws and insert the
spacer under the screw head, then
re-tighten the screws.

Rehingeing the door

The side at which the door opens can be changed from the right side
(factory adjustment) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, the appliance
may not be connected to the mains. Remove plug from the mains
beforehand.
Procced as follows:
To
carry
operations, we suggest that this be
made with another person that will
keep a firm hold on the door of the
appliance during the operations.
Gently lay the appliance on its
back.
1.
Remove the ventilation grille.
2.
Remove the bottom hinge (A) by
unscrewing the fixing screws.
3.
Remove the door.
4.
Unscrew the pin of the bottom
hinge (f) and refit it on the
opposite side.
68
All manuals and user guides at all-guides.com
keep
ventilation
out
the
following
A
B
NP007
PR153

Publicité

Table des Matières
loading

Table des Matières