Switch And Indicators; Handling The Appliance; Installation; Adjusting The Temperature - AEG A75100GA4 Mode D'emploi

Switch and indicators

( A ) On/off indicator
( B ) On/off switch
( C ) Thermostat
higher temperatures)
( D ) Temperature display
( E ) Thermostat
lower temperatures)
( F ) Alarm indicator
( G ) ACOUSTIC alarm OFF switch
(see "Control and information
system")
( H ) QUICK FREEZE indicator
( J ) QUICK FREEZE pushbutton
switch

Handling the appliance

Installation

Insert the plug into the socket. Press the on/off switch of the freezing
compartment. The green on/off indicator will light continuously and the
current temperature value will flash.
The flashing of the red alarm indicator and the acoustic alarm will warn you
that the internal temperature is not yet sufficient for the conservation of
food. To switch off the acoustic alarm and the temperature display flashing,
press button "G". Do not put any food in the freezer until the internal
temperature reaches -18 °C or the red alarm indicator goes out.

Adjusting the temperature

Temperature controls
Temperature can be regulated with the use of the "+" (higher) and "-" (lower)
buttons.
These buttons are interlinked with the temperature display.
Press either "+" or "-" to switch the temperature display from CURRENT
temperature (continuous lighting ) to DESIRED temperature (flashing).
If neither button is pressed again, the temperature display will shortly
(within approx. 5 seconds) return to CURRENT temperature.
DESIRED temperature:
It is the temperature to be achieved in the freezing compartment.
CURRENT temperature:
48
(green)
button (for
button (for
(red)
(yellow)