Maintenance; Defrosting - AEG A 60120 GS4 Notice D'utilisation

G G B B
The materials used on this appliance marked with the sympol
recyclable.

Maintenance

Defrosting

Bleeding part of the moisture of cooling chamber in form of frost and ice goes with the
operation of the appliance.
Thick frost and ice has an insulating effect, so it reduces cooling efficiency as the
temperature increases, it needs more energy, at
a certain thickness it does not allow the door of
the freezing compartment to open, possibly the
door can be broken.
It is possible to scrape off and remove smaller
frost and ice with the enclosed ice scraper.
The tray in figure is not a piece of accessories to
the appliance!
When ice coating is so thick that it can not be removed with the frost scraper
defrosting is necessary. Its frequency depends on usage.
How to defrost it:
Disconnect the appliance from the electrical supply. If the plug is not accessible turn
the temperature control knob to "0" position.
Take the frozen foods out of the appliance and put them into a basket lined with paper
or cloth. Store them in a possibly cool place or replace them into a frozen or fresh food
compartment of a refrigerator.
Leave the door open.
Sweep off the melting water occasionally with a cloth or sponge in direction of sides
which gathers in the outlet channel practically
formed in the bottom of the appliance and can be
removed as follows:
Put a tray high enough in front of the appliance.
Insert the plastic scraper into the defrost water
outlet according to the picture. Defrost water will
flow into the tray through the outlet.
Defrosting process can be made quicker by placing a pot or dish filled with warm water
to the cooling plate formed as a shelf.
After defrosting wipe the surfaces and push defrost water outlet back.
62
are