Warnings For Reprocessing (Cleaning - Disinfection - Care - Sterilization) - SciCan SANAO 200 L Mode D'emploi

1 Important Information
Warnings for reprocessing (cleaning – disinfection – care – sterilization)
 Clean and sterilize the handpiece prior to the first use and after each patient operation and prior to disposal.
 Remove the rotation instruments (drills, files, burs) before reprocessing.
 Only use disinfecting cleaning products that are designed for disinfecting dental handpieces and contra-angles. Do not use setting cleaning
agents.
 Adhere to the concentrations and immersion periods recommended by the manufacturer of the pre-disinfection product.
 Do not use vinegar to clean the spray heads.
 Open the sterilization pouches directly before use.
 Excessive use of the cleaning products (dental care spray, cleaning and disinfection products) may possibly lead to the permeation of
these products into the motor and may impair its functionality. The instructions for care for the respective product must be observed.
 If the handpiece will not be used for a long period of time, clean it as per the instructions after its last use and store it in a dry location.
 Observe the national guidelines and provisions for the processing of medical products.
Page 10 SANAO EN