SciCan SANAO 200 L Mode D'emploi page 29

5 Operation
CAUTION! Risks posed by faulty chuck!
The cutter or grinder could fall out and lead to injuries.
 When inspecting, inserting and removing, wear protective gloves or finger guards in order to prevent risk of injury or infection.
 Pull on the cutter or grinder to check whether the chuck is functioning correctly and to ensure that the cutter or grinder is in a fixed position.
How to use the handpieces: 200 L / 40 / 40 L / 10 / 10 L
1. Firmly press the push-button using your thumb and simultaneously
insert the cutter or grinder as far as it will go.
2. Ensure that the cutter or grinder is in a fixed position by pulling it.
3. Ensure that the push-button lies evenly and is not tilted.
How to use the handpieces: 40 ST
1. Turn the clamping ring anti-clockwise and insert the cutter
or grinder into the chuck as far as it will go.
2. Re-tighten the clamping ring by turning it clockwise.
3. Ensure that the cutter or grinder is in a fixed position by pulling it.
Pos : 25 /926-Syc oT ec/5_Bedi enung/5_Fr äs wer kz eug und Diamantsc hlei fer entfernen (Handstüc ke SciCan,Syc oTec,Meisi nger) - Vari abl e @ 8\mod_1340814869808_6.doc @ 60457 @ 2 @ 1
Page 29 SANAO EN