Removing Cutters Or Diamond Grinders - SciCan SANAO 200 L Mode D'emploi

5 Operation

Removing cutters or diamond grinders

CAUTION! Risk of injury from the rotating cutter or grinder!
Cut injuries and damage to the chuck.
 Do not touch rotating cutters or grinders.
 Never press the push-button while the cutter or grinder is rotating.
 Remove cutter/grinder from the handpiece after the treatment has ended in order to prevent injury and infections when returning to the
holder.
How to use the handpieces: 200 L / 40 / 40 L / 10 / 10 L
 After the cutter or grinder has been switched off, firmly press the push-button
using your thumb and simultaneously pull the cutter or grinder out.
How to use the handpieces: 40 ST
1. After the cutter or grinder has been switched off, turn the clamping ring
anti-clockwise and pull the cutter or grinder out.
2. Re-tighten the clamping ring by turning it clockwise.
Pos : 26 /926-Syc oT ec/5_Bedi enung/6_Gummi kelche und Polierbürsten eins etz en und entfernen (Handstüc ke SciC an, Syc oT ec,M eisinger) - Var @ 8\mod_1340815102757_6.doc @ 60476 @ 22 @ 1
Page 30 SANAO EN