SciCan SANAO 200 L Mode D'emploi page 9

1 Important Information
 It is recommended that appropriate protective gloves and goggles be worn when working with the handpiece and the rotation instruments.
 Use a rubber dam during patient procedures.
 During a long treatment period, clean and check the instrument every ten minutes.
 The handpiece may only be disassembled by an approved retailer or the manufacturer.
 Do not press the push-button of the handpiece during operation.
 Adjust the rotational speed of the motor to the handpiece used.
 Do not use rotation instruments (cutter, grinder) which are blunt, bent or damaged.
 Use SANAO 200 L handpieces exclusively with spray cooling.
 Should a problem arise with the handpiece, consult our customer service department.
 Discontinue using the handpiece in the event of damage, overheating, unusual operating noises, excessive vibrations, an excessive lateral
run-out of the instrument or an inadequate fixation of the instrument. In order to prevent further damage, consult our customer service
department or your local retailer of this product.
Page 9 SANAO EN