Connecting The Handpiece - SciCan SANAO 200 L Mode D'emploi

5 Operation

Connecting the handpiece

NOTE! The handpiece may become loose during treatment!
An incorrectly-latched handpiece may detach from the motor coupling and fall down.
 Before each treatment, check whether the handpiece is securely latched with the motor coupling by gently pulling it.
NOTE! Removing and returning the handpiece while the drive motor is rotating.
Damage to the catch.
 Never remove or return the handpiece while the drive motor is rotating.
NOTE! When used together with a drive motor (SANAO 40 ST)!
The handpiece may become blocked.
 Only use handpiece when the chuck is in a closed position.
NOTE! Damage (SANAO 200 L / 40 / 40 L / 10 / 10 L)!
Pressing the foot switch while connecting and removing the handpiece may lead to damage to the handpiece and to the motor coupling.
 Do not connect or remove the handpiece while pressing the foot switch.
Page 26 SANAO EN