Warnings For Reprocessing (Cleaning - Disinfection - Care - Sterilization); Proper Use - Intended Use - SciCan STATIS ML Mode D'emploi

1 Important Information
Warnings for reprocessing (cleaning – disinfection – care – sterilization)
 Clean and sterilize the turbine prior to the first use and after each patient procedure and prior to disposal.
 Remove the rotation instruments before reprocessing.
 Only use disinfecting cleaning products that are designed for disinfecting dental instruments. Do not use setting cleaning agents.
 Adhere to the concentrations and immersion periods recommended by the manufacturer of the disinfection product.
 Do not use vinegar to clean the spray heads.
 Open the sterilization pouches directly before use.
 Excessive use of the cleaning products (dental care spray, cleaning and disinfection products) may impair the functionality of the turbine.
The instructions for use for the respective product must be observed.
 If the turbine will not be used for a long period of time, clean it as per the instructions after its last use and store it in a dry location.
 Observe the national guidelines and provisions for the processing of medical products.
Proper use – intended use
This turbine is:
• intended only for dental treatment within the scope of dentistry. Any type of misuse or modifications of the product are not permitted and
may cause danger.
• a turbine in accordance with applicable legal national regulations.
Page 10 STATIS EN