Removing The Drill - SciCan STATIS ML Mode D'emploi

5 Operation

Removing the drill

WARNING! Activation of push-button during operation!
Damage to clamping mechanism and injury by rotating drill.
 Only press the push-button, if the drill no longer rotates.
WARNING! Heated turbine head by damaged turbine!
Burns of soft tissue.
 Avoid any contact of the turbine head with soft tissue.
CAUTION! Place instrument with attached drill into holder!
Injury and infections by the drill. The turbine may fall down.
 Remove the drill from the turbine after each concluded treatment.
1. Ensure that the drill no longer rotates.
2. Firmly press the push-button with the thumb down and at the same time pull the drill out.
Page 28 STATIS EN