Optional Al100 Accent Light Installation - Emerson PENBROOKE SELECT ECO CF5200AP00 Mode D'emploi

11. Optional AL100 Accent Light Installation

11.1
CAUTION: To reduce the risk of electric shock,
disconnect the electrical supply circuit to the fan
before installing light kit assembly.
Position the AL100 Accent Light so that the opening of the
AL100 Accent Light slides through the Downrod. Align the
Mounting Holes of the AL100 Accent Light to the Motor
Assembly (Figure 32).
NOTE: Be sure the AL100 accent light connector is
located close to the motor assembly connector for
ease of installation.
Engage the AL100 Accent Light Connector to the Motor
Assembly 2-Pin Connector (Figure 32).
11.2
Install the AL100 Accent Light to the Motor Assembly using
Three AL100 Accent Light Mounting Screws (supplied with
accent light) (Figure 33).
11.3
Securely connect the AL100 Accent Light Connector to the
Motor Assembly Connector (Figure 34).
Screw the Four 25-Watt Candelabra Base Bulbs (supplied)
into the AL100 Accent Light Sockets (Figure 34).
AL100 ACCENT
LIGHT HARNESS
CONNECTOR
MOTOR ASSEMBLY
2-PIN CONNECTOR
Figure 32
AL100 ACCENT
LIGHT HARNESS
SCREW (3)
Figure 33
25-WATT
CANDELABRA
BASE BULBS (4)
Figure 34
24
AL100 ACCENT
LIGHT HARNESS
MOTOR
ASSEMBLY
AL100 ACCENT
LIGHT HARNESS
MOTOR
ASSEMBLY
AL100 ACCENT
LIGHT SOCKETS (4)
LIGHT KIT & MOTOR
ASSEMBLY CONNECTORS