Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3. Ceiling Fan Assembly
3.11
Loosely attach one Blade/Flange Assembly to the Motor
Hub by securing the Two #10-32 x 5/8" Oval Head Screws
(supplied in parts bag) (Figure 11).
Install remaining Blade Assemblies in the same way.
Gently snug all Flange Screws to the Motor Hub, working
around the Hub in a Clockwise sequence.
The Blade Flanges have an Interlocking Feature that must
be fully engaged before tightening the Screw. Make sure
all the Flanges are properly engaged and then tighten the
Flange Screws. If one of the Flanges does not seat
properly on the Motor Hub, loosen the adjacent Flange
Screws, re-engage and reseat the Flanges, then tighten
the Screws again.
NOTE: Take care not to scratch fan housing when
installing blades.
WARNING
!
To reduce the risk of personal injury, do not bend the
blade flange when installing the blade flanges,
balancing the blades or cleaning the fan. Do not insert
foreign objects in between rotating fan blades.
(Continued)
Figure 11
9
#10-32 x 5/8" OVAL
HEAD SCREW
(2 per blade/flange)
BLADE/FLANGE
ASSEMBLY
MOTOR
HUB
Publicité
Table des Matières
