Clearing A Jam - Hitachi NR 1890DC Manuel D'instructions

English
(3) Install the hook on the other side and securely
fasten with screw.

CLEARING A JAM

If nails are jammed in fi ring head, remove it, and adjust the
nailing in the following order.
CAUTION
● Remove the battery from the Nailer.
1 Remove the battery from the Nailer.
2 Remove all nails.
3 Remove the M5 bolts with wrench.
3
4 Pull magazine away from the fi ring head, and clear
jam.
CAUTION
● NEVER hit the driver blade.
● NEVER point the tool at yourself or another
person, to avoid risk of injury by mis-fi ring.
Even if the battery is removed from the nailer,
there is still energy of compressed air remaining
inside.
26
Do not loosen
these screws
5 Attach the magazine to the injector and tighten with
the M5 bolt.
NOTE
● In case of frequent jam, contact a Hitachi authorized
service center.
3