Hitachi CS 36DL Mode D'emploi page 11

WHAT IS WHAT?
1. Switch: Device activated by the fi nger.
2. Lock-off button: Button that prevents the accidental
operation of the trigger.
3. Chain brake: Device for stopping or locking the saw
chain.
4. Spiked bumper: Device for acting as a pivot when in
contact with a tree or log.
5. LED light: Light that illuminate the cutting edge.
6. Oil tank cap: Cap for closing the oil tank.
7. Oil sight glass: Window to check chain oil amount.
8. Front handle: Support handle located at or towards the
front of the main body.
9. Battery: Power source to drive the unit.
10. Rear handle (Top handle): Suupport handle located on
the top of the main body.
11. Hook: Tool for hanging the unit with rope etc.
12. Tension dial: Device for adjusting tension of saw chain.
13. Knob: Knob for securing tension dial and side cover.
14. Saw chain: Chain, serving as a cutting tool.
15. Guide bar: The part that supports and guides the saw
chain.
16. Side cover: Protective cover to the guide bar, saw
chain, clutch and sprocket when the chain saw is in use.
17. Charger: For charging the battery.
18. Oil feeder: Container for oil.
19. Chain case: Case for coverring the guide bar and saw
chain when the unit is not being used.
20. File: Tool for sharpening saw chain.
21. Bolt: Bolt for fi xing the side cover in place.
22. Hexagonal bar wrench: Tool for loosening and
tightening the bolt.
(Original instructions)
10
11
2
1
3
4
5
8
6
7
13
21
16
12
17
19
22
English
9
15
14
18
20
11