Troubleshooting; Scrapping - Nilfisk ALTO FLOORTEC 550 P Manuel D'utilisation

TROUBLESHOOTING

TROUBLE
The petrol engine doesn't work
by pulling the starting handle
The petrol engine stops during
operation
The side broom does not
operate
Pulling the selector lever, the
machine doesn't move or moves
slowly
(1): For the related procedure, see the Petrol Engine User
Manual.
For further information, refer to the Service Manual,
available at any Nilfisk-Alto Service Center.
146 2572 000(1)2005-03 A
REMEDY
Check that the ignition switch is
in the "I" position
Check that the engine oil level is
sufficient (1)
Check that the fuel tap is open
Check that the tank contains fuel
Check that the hood is correctly
closed
Check that the fuel reaches the
carburettor (1)
Check that the spark plug
produces a spark (1)
Check that the engine oil level is
sufficient (1)
Check that the tank contains fuel
Lower the side broom
Check that the side broom belt
and the belt tensioner work
properly
Check that the brake pedal
(optional) on the front wheel is
deactivated
Adjust the belt tensioner
Check the drive belt efficiency
USER MANUAL

SCRAPPING

Have the machine scrapped by a qualified scrapper.
Before scrapping the machine, remove the following
components:
– Polyester dust filter
– Main and side brooms
– Engine oil
CAUTION!
The removed components must be
disposed of properly according to the Law
in force.
ENGLISH
FLOORTEC 550 P 13