Unpacking; Machine Description; Operation Capabilities; Conventions - Nilfisk ALTO FLOORTEC 550 P Manuel D'utilisation

USER MANUAL
ENGLISH
– Adjust the operation speed to suit the floor conditions.
– Do not tamper with the machine safety guards and
follow the ordinary maintenance instructions
scrupulously.
– Do not remove or modify the plates affixed on the
machine.
– In case of machine malfunctions ensure that these
are not caused by a lack of maintenance. Otherwise,
request assistance from the authorised personnel or
from an authorised Service Center.
– In case of part replacement, order ORIGINAL spare
parts from an authorised Dealer or Retailer.
– To ensure the proper and safe operation of the
machine, have the scheduled maintenance, detailed
in the related chapter of this Manual, performed by
the authorised personnel or an authorised Service
Center.
– The machine must be disposed of properly, because
of the presence of toxic-harmful materials (oils,
plastic materials, etc.), which are subject to standards
that require disposal in special centers (see chapter
"Scrapping").
– If the machine is used according to the instructions,
the vibrations do not cause dangerous situations. (3,3
2
m/s EN 1033-1995-08)
– During the petrol engine operation, its silencer warms
up; do not touch the silencer when it's hot to avoid
burns or fire.
– Running the engine with an insufficient quantity of
petrol can seriously damage the engine. Check the oil
level when the engine is off and the machine is on an
even surface.
– Never run the petrol engine without air filter, as the
engine could be damaged.
– Technical service operations on petrol engine must
be performed by an authorised Dealer.
Use only original spare parts or equivalent for the petrol
engine. Using spare parts of lower quality can seriously
damage the engine.
4 FLOORTEC 550 P

UNPACKING

When the machine is delivered, check that the cardboard
packing and the machine were not damaged during
transportation. If the damage is evident, keep the packing
and have it checked by the Parcel Service that delivered
it. Call the Carrier immediately to fill in a damage claim.
Please check that the following items have been supplied
with the machine:
– Sweeper manual
– Petrol engine manual
– Spare Parts List

MACHINE DESCRIPTION

OPERATION CAPABILITIES

This sweeper has been designed and built to be used by
a qualified operator to clean (by sweeping and vacuuming)
smooth and solid floors in civil and industrial environments
and to collect dust and light debris under safe operation
conditions.

CONVENTIONS

Forward, backward, front, rear, left or right are intended
with reference to the operator's position, that is to say on
the driver's seat with the hands on the handlebar (1, Fig.
C).
Control panel
(See Fig. B)
1. Control panel
2. On/off key switch
3. Panel fastening screws
146 2572 000(1)2005-03 A