Introduction; Parts And Service; Nameplate; Unpacking The Machine - Nilfisk Advance SC901 ST Serie Mode D'emploi

revised 4/2019

INTRODUCTION

This manual will help you get the most from your Advance™ automatic scrubber/dryer. Read it thoroughly before operating the machine.
Note: Bold numbers in parentheses indicate an item illustrated on pages A-6 – A-8 unless otherwise noted.
This product is intended for commercial use only.

PARTS AND SERVICE

Repairs, when required, should be performed by your Authorized Advance Service Center, who employs factory trained service personnel, and
maintains an inventory of Advance original replacement parts and accessories.
Call Advance for repair parts or service. Please specify the Model and Serial Number when discussing your machine.
MODIFICATIONS
Modi cations and additions to the cleaning machine which affect capacity and safe operation shall not be performed by the customer or user
without prior written approval from Nil sk Inc. Unapproved modi cations will void the machine warranty and make the customer liable for any
resulting accidents.

NAMEPLATE

The Model Number (also known as Part Number) and Serial Number of your machine are shown on the Nameplate in the battery compartment.
This information is needed when ordering repair parts for the machine. Use the space below to note the Part Number and Serial Number of your
machine for future reference.
PART NO. ______________________________________
SERIAL NO. ____________________________________

UNPACKING THE MACHINE

When the machine is delivered, carefully inspect the shipping packaging and the machine for damage. If damage is evident, save the shipping
carton (if applicable) so that it can be inspected. Contact the Advance Customer Service Department immediately to le a freight damage claim.
Refer to the unpacking instruction sheet included with the machine to remove the machine from the pallet.
REGULATORY
FCC:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
Users are not permitted to make changes or modify the device in any way. Changes or modi cations not expressly approved by Nil sk,
Inc. will void the user's authority to operate the equipment.
IC:
This device complies with Industry Canada ICES-002. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired
operation of the device.
3/2019
INSTRUCTIONS FOR USE
56091217 - SC901 ST
ENGLISH - A
A - 3