Troubleshooting; Scrapping - Nilfisk Advance Micromax 17E Instructions D'utilisation

INSTRUCTIONS FOR USE

TROUBLESHOOTING

TROUBLE
Incorrectly connected electrical
Motors do not work
supply plug (22, Fig. C)
Full recovery tank (5, Fig. H)
Clogged vacuum grid (1, Fig. E) or
stuck closed float
Hose (25, Fig. C) disconnected
from the squeegee
Insufficient dirty water vacuum
Dirty squeegee or worn/damaged
squeegee blades (13 and 14, Fig.
C)
Incorrectly closed tank cover, or
damaged gasket (7, Fig. E) or
clogged compensation hole (11,
Fig. E)
Dirty solution filter (2, Fig. F)
Insufficient solution flow to the
Dirty tank (7, Fig. H) (clogged
brush
output hole)
Debris under the squeegee blades
(13 and 14, Fig. C)
Scoring caused by the Worn, chipped or torn squeegee
squeegee blades (13 and 14, Fig. C)
Squeegee not balanced by means
of the knob (12, Fig. C)
For further information consult the Service Manual at the
Advance Service Center.
10
All manuals and user guides at all-guides.com

SCRAPPING

Have the machine scrapped by a qualified scrapper.
CAUSE
Before scrapping the machine, remove the following
components:
–
–
–
Brush
Pad
Electrical motors
CAUTION!
The removed components must be disposed of
properly according to the Law in force.
Micromax™ 17E — 909 5473 000(2)2005-04