General Information - Calpeda QML/A 1 D 12A-FA Manuel D'instructions

THIS INSTRUCTION MANUAL IS THE PROPERTY
OF CALPEDA S.P.A. ANY REPRODUCTION, EVEN IF
PARTIAL, IS FORBIDDEN
SUMMARY
1. GENERAL INFORMATION ............................ 17
2. TECHNICAL DESCRIPTION ......................... 18
3. TECHNICAL FEATURES ............................... 18
4. SAFETY ......................................................... 19
5. TRANSPORTATION AND HANDLING ........... 20
6. INSTALLATION .............................................. 20
7. STARTUP AND OPERATION ......................... 22
8. MAINTENANCE ............................................ 25
9. DISPOSAL .................................................... 25
10. SPARE PARTS .............................................. 25
11. ACCESSORIES ............................................. 25
12. LIST OF PARAMETERS ................................ 26
13. ALARMS ....................................................... 28
14. TROUBLESHOOTING ................................... 29
15 DRAWINGS FOR TERMINALS CONNECTIONS .. 78
Declaration of conformity ...................................... 92

1. GENERAL INFORMATION

Before using the product carefully read the information
contained in this instruction manual, the manual
should be kept for future reference.
Italian is the original language of this instruction
manual, this language is the reference language in
case of discrepancies in the translations.
This manual is part of the essential safety requirement
and must be retained until the product is finally de-
commissioned.
The customer, in case of loss, can request a copy
of the manual by contacting Calpeda S.p.A. or their
agent, specifying the type of product data shown on
the label of the machine (see 2.3 Marking)
Any changes, alterations or modifications made
to the product or part of it, not authorized by the
manufacturer, will revoke the "CE declaration" and
warranty.
This appliance
operated by children younger than 8
years, people with reduced physical,
sensory or mental capacities, or
inexperienced people who are not
familiar with the product, unless
they are given close supervision or
instructions on how to use it safely
and are made aware by a responsible
person of the dangers its use might
entail. Children must not play with the
appliance.
It is the user's responsibility to clean
and maintain the appliance. Children
should never clean or maintain it
unless they are given supervision.
Do not use in ponds, tanks or swimming
pools or where people may enter or
come into contact with the water.
M004_REV06_ - Operating Instructions
should not be
1.1. Symbols
To improve the understanding of the manual, below
are indicated the symbols used with the related
meaning.
Information and warnings that must be
observed, otherwise there is a risk that the
machine could
personnel safety.
The failure to observe electrical information
and warnings, could damage the machine or
compromise personnel safety.
Notes and warnings
i
management of the machine and its parts.
The failure to observe mechanical information
and warnings, could compromise personnel
safety.
The product surface can be extremely hot and
cause burns or injury to personnel
.
The failure to observe mechanical information
and warnings, could compromise personnel
safety.
Operations that could be performed by the final
user. After carefully reading of the instructions,
is responsible for maintenance under normal
conditions. They are authorized to affect
standard maintenance operations.
Operations that must be performed by a
qualified electrician. Specialized technician
authorised to affect all electrical operations
including maintenance. They are able to
operate with in the presence of high voltages.
Operations that must be done performed by
a qualified technician. Specialized technician
able to install the device, under normal
conditions, working during "maintenance",
and allowed to do electrical and mechanical
interventions for maintenance. They must
be capable of executing simple electrical
and mechanical operations related to the
maintenance of the device.
Indicates that it is mandatory to use individual
protection devices.
Indicates that it is mandatory to use individual
protection devices - eye protection.
Operations that must be done with the device
switched off and disconnected from the power
OFF
supply.
Operations that must be done with the device
switched on.
ON
1.2. Manufacturer name and address
Manufacturer name: Calpeda S.p.A.
Address: Via Roggia di Mezzo, 39
36050 Montorso Vicentino - Vicenza / Italia
www.calpeda.it
1.3. Authorized operators
The product is intended for use by expert operators
divided into end users and specialized technicians.
(see the symbols above).
It's forbidden, for the end user, carry out
i
operations which must be done only by
specialized technicians. The manufacturer
declines any liability for damage related to the
non-compliance of this warning.
damage or compromise
for the correct
Page 17 / 92
GB