Housing And Sole Of The Iron; Risk Of Injury; Storage; Troubleshooting - SilverCrest SDBE 2600 A1 Mode D'emploi

Dry the sole of the iron 0 thoroughly. To do
■
this, move the sole of the iron 0 back and forth
several times over a towel or an old piece of
fabric.
■ Allow the steam iron to cool down before placing
it in storage.

Housing and sole of the iron

MORTAL DANGER!
► ALWAYS remove the plug before cleaning the
appliance. There is a risk of electric shock!

RISK OF INJURY!

► Allow the appliance to cool down before
cleaning it. Otherwise, there is a risk of burns!
CAUTION! PROPERTY DAMAGE!
► Do not use aggressive, abrasive or chemical
cleaning agents. They can damage the surface
and also lead to irreparable damage to the
appliance.
■ Clean the housing with a soft, dry cloth only.
Clean the sole of the iron 0 using a damp cloth
■
and a mild, non-scouring detergent.
■ Dry the appliance well before using it again.

Storage

Store the cooled-down appliance in a clean, dust-
free and dry location.
SDBE 2600 A1
All manuals and user guides at all-guides.com

Troubleshooting

The steam iron blasts out no steam/very
little steam:
The reserves of tap water/distilled water in the
steam iron are depleted. Fill the water tank (See
"Filling the water tank").
The steam iron does not get hot:
■
■

Disposal

Dispose of the appliance through an approved
disposal centre or at your community waste facility.
Please observe applicable regulations. Please
contact your waste disposal facility if you are in
any doubt.
The steam iron is not plugged in or is not switched
on. Insert the plug into a wall power socket and
adjust the temperature control 6 to the desired
ironing temperature.
The steam iron is defective. Arrange for the steam
iron to be repaired by qualifi ed specialists.
Never dispose of the appliance
in the normal domestic waste.
This product is subject to the
provisions of European Directive
2012/19/EU.
Dispose of all packaging materials in an
environmentally friendly manner.
GB
29