Plugging In And Ironing; Steam Ironing; Ironing With Steam Blast; Temporarily Setting The Steam Iron Aside - SilverCrest DB 1400 A1 Mode D'emploi

Plugging in and ironing

Dry ironing is possible at all temperatures, steam iro-
ning is possible by adjusting to
thermostat 6.
• Insert the plug into a power socket.
Attention!
Should the clothing care instructions forbid ironing,
(symbol ), the clothing item may not be ironed.
If you do so, the clothing item could be permanently
damaged.
• Check the care instructions on the labels in the
garment to see whether it is suitable for being
ironed, and at which temperature setting.
Symbol thermostat 6
• Select the best suitable temperature setting with
the thermostat 6.
The temperature control lamp 7 glows. When the
set temperature has been reached, the temperature
control lamp 7 goes out.
• Wait until the temperature control lamp 7
switches off.
• To moisten the laundry, press the button for fine
5.
water spray
on the
Type of material
Acrylic, rayon
Silk, wool, polyester
blended fabrics,
viscose
Cotton, linen
This function is suitable for extremely dry and extremely
crumpled garments.

Steam ironing

• Set the steam regulator 3 to the desired steam
setting.
• The thermostat 6 must be moved to at least
adjustment range
duce any steam.
Note:
After steam ironing, or if steam is no longer required,
set the steam regulator 3 to
may start dripping out of the ironing sole 0!

Ironing with steam blast

The steam blast is especially suitable for smoothing
parts of a garment that are difficult to reach.
• Slightly raise the steam iron.
• For a steam blast, press the steam blast
4.
button
Temporarily setting the steam
iron aside
Risk of fire!
NEVER leave the hot, mains-connected or switched-on
steam iron unattended.
• Set the thermostat 6 to the "MIN" position.
• Always put the steam iron on the appliance
base 9.
- 6 -
. Otherwise it cannot pro-
. Otherwise, water