Safety Instructions; Risk Of Electric Shock - SilverCrest SDBE 2600 A1 Mode D'emploi

Fer a repasser vapeur
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Safety instructions

RISK OF ELECTRIC SHOCK!

The voltage of the power source must conform to the details given on
the type plate of the appliance.
In order to avoid potential risks, arrange for defective appliances to be
checked and possibly repaired by qualifi ed technicians, or contact our
customer service department.
To prevent accidents, have defective plugs and/or power cables
replaced immediately by an authorised specialist technician or our
customer service department.
When disconnecting the appliance from the power source, pull only
on the plug itself, never on the cable.
Never bend (kink) or crush the power cable, always route it in such a
way that it cannot come into contact with hot surfaces and such that
no one can step on or trip over it.
Remove the plug from the mains power socket after every usage,
before cleaning the appliance and when refi lling the appliance with
water.
Always unroll the power cable fully before switching on and do not
use an extension cable.
Never touch the power cable or the plug with wet hands.
Never use the steam iron adjacent to water contained in a bath, shower,
wash basin or other vessels. Water in the proximity of the appliance is
hazardous, even if the appliance is switched off .
Under no circumstances should you submerge the steam iron in any
liquid or permit liquids to penetrate into the housing of the steam iron.
Do not expose the appliance to humidity and do not use it outdoors.
If liquid gets into the housing, disconnect the appliance from the mains
power socket immediately and have it repaired by a qualifi ed technician.
SDBE 2600 A1
All manuals and user guides at all-guides.com
GB
23

Publicité

Table des Matières
loading

Table des Matières