Safety Information - Kettler MX 1 Mode D'emploi Et Instructions D'entraînement

Training an Operating Instruction

Safety information

Please pay attention to the following points for your own
safety:
• The installation of the training device must be
undertaken on a solid foundation suitable for this
purpose.
• Before the initial start-up and, in addition, after
approx. 6 operating days the connections are to
be checked for a firm location.
• In order to avoid injuries as a result of incorrect
loading or overloading, the training device must
only be operated according to instructions.
• From the long-term perspective, an installation of
the device in damp spaces is not recommended
because of the rust formation associated with this.
• Regularly check the functionality and appropriate
condition of the training device.
• The safety controls rank among the duties of the
operator and must be regularly and appropriately
implemented.
• Defects or damaged components are to be exchan-
ged immediately. Use only original KETTLER repla-
cement parts.
• Until breakdown maintenance has been implemen-
ted the device may not be used.
• The level of safety of the device can only be main-
tained with the proviso that it is regularly checked
for damages and wear and tear.
4
GB
For Your Safety:
.
❥
Before beginning your program of exercise, consult your doc-
tor to ensure that you are fit enough to use the equipment. Base
your program of exercise on the advice given by your doctor.
Incorrect or excessive exercise may damage your health.
G
This symbol in the instructions refers to the glossary
(page 29). There the respective term is explained.