Some Stove has two blowers, with this function you can select operation one or two blower.
select Blower AUX 0 is operation one blower, select Blower AUX 1 is operation two blowers.
Two blowers operation could improve the stove efficiency.
Pressing the key
Pressing the key
If showing following words, such as:
It means that the high temperature sensor has some problem,
Such as: 1. the switch is broken,
2. The temperature is too high that the stove runs not properly
It means light failure at start.
Such as: 1. there have clinkers in fire pot.
2. The fire pot has not put right.
3. The switch is broken,
It means fire put out automatically.
Such as: 1.There has no fuel at hopper.
2. Auger motor is broken and stop feeding the fuel.
, to select.
the programming will finish.
!! ATTENTION !!