Fuel Requirement - Warm Tech PAP24000 Mode D'emploi

1. Fuel Requirement

Before introducing how the stove can be operated, the fuel of stove should be briefly
introduced since it is related to the performance of the stove. (Your pellet stove has been
designed to burn wood pellets only. Do not use any other type of fuel, as this will void any
warranties stated in this manual.)
Pellet quality is important, please read the following:
The performance of your pellet stove is greatly affected by the type and quality of wood pellets
being burned. As the heat output of various quality wood pellets differs, so will the
performance and heat output of the pellet stove.
We recommend the use of pellets that meet or exceed these standards. Please use a recommended
pellet type.
Moisture content (as fired basis)
CEN/TS 14774-1 and ISO 687
Ash content (as fired basis)
ISO1171
Volatile matter (dry, ash-free basis)
ISO562
Hydrogen content (as fired basis)
ISO609
Carbon content (as fired basis)
ISO609
Sulfur content (as fired basis)
ISO 351 and ISO 334
Net (lower) calorific value (as fired
basis) ISO1928
Diameter
Swelling index
ISO 501
Length
CAUTION:
It is important to select and use only pellets that are dry and free of dirt or any impurities such as high
salt content. Dirty fuel will adversely affect the operation and performance of the unit and will void the
warranty.
≤12%
≤0.7% without bark
≤2.0% with bark
80% to 88%
5.0%to 6.5%
40% to 50%
≤0.1%
16900KJ/KG to 19500KJ/KG
4mm to 10mm
-
≤50mm