Structure Instruction - Warm Tech PAP24000 Mode D'emploi

3. Structure instruction

The stove is mainly made up of following items: (PAP24000 AS EXAMPLE)
1. Hopper covers 2.hopper 3.auger 5.convertion blower 4. Auger motor 6.venting pipe 7. Exhaust
blower 8.front cover 9.ash drawer 10.fire shield board 11.stove door 12.heat exchanger 13. Control
board
The following is a list of main components and their functions
IGNITER
The STOVE comes equipped with an automatic igniter for lighting the fuel when the stove is in lighting
mode. There are two ways to light the wood pellet for our models. One is the igniter heats wood pellet
directly through the burn pot and then lighted by the combustion blower. The other one is that the
igniter lights the pellet directly. The igniter remains energized for the first eight minutes of the lighting
sequence.