Sagi KP8V Manuel D'utilisation Et Instructions Originales page 107

UP and DOWN keys
These keys allow to increase or decrease the value of the
parameter to be changed (the backlighting is flashing during these
operations).
Pressed and released enable the visualisation of the minimum and
maximum temperatures recorded (if available) and any active
alarms.
The button, held down for a period exceeding 3 seconds, allows
the modification of the chamber humidity settings.
Pressed at the same time for a time greater than 3 seconds enables
the selection of the keyboard lock or entry into parameter
configuration by way of the confirmation with the button.
DEFROST key
Pressed for a time greater than 3 seconds activates / deactivates
the manual defrost.
LIGHT key
Pushed and released allows the activation or the deactivation of the
unit's interior illumination.
Press and hold to set a different lighting shade in sequence,
according to 4 pre-set shades.
COMPRESSOR ICON
Led on: compressor activated
Led blinking: compressor activation delay
DEFROST ICON
Led on: defrost in progress
Led blinking: defrost activation delay or dripping in progress
FAN ICON
Led on: room fans activated
Flashing LED: ventilator activation delay
HACCP ICON
HACCP
Led on: alarm in memory
Led blinking: alarm in progress
°C / °F ICON
Led °C on: values displayed in Celsius
Led °F on: values displayed in Fahareheit
AUX ICON
AUX
Led on: lighting on
Led off: lighting off
ON / OFF ICON
Led on: appliance in Stand-by
Led off: appliance ON
17