Connection - Waldmann SPOT LED 003 Mode D'emploi

GB Instructions For Use Machine Light MC(X,T,B)FL 3 N „SPOT LED 003"

Connection

Fig. 14
14.2
14.1
The light is connected to the mains
by means of attached plug-in power
supply unit [14.1].
To adapt it to the existing plug
system, the plug unit [14.2] can be
exchanged.
CAUTION
Damage caused by wrong mains
voltage!
A wrong mains voltage can result in
damaging or destroying the lamp.
¾ Before putting the light into
operation, the user has to check
whether the mains voltage is
identical to the rated voltage
specified on the rating plate!
Fig. 15 Note for USA
The mounted plug-in power supply
unit can also be used in the USA.
To this end, the plug-in unit contain-
ing the round plug-in pins must be
exchanged for the delivered plug-
in unit containing flat plug-in pins
(see Fig. 15).
23