Transporting Ride-On Mower With Attached Snow Plough; Standard Spare Parts; Accessories; Snow Chains - Viking ASS 125 Manuel D'utilisation

15. Transport
15.1 Transporting ride-on mower with
attached snow plough
Risk of accident!
Before transport, carefully read and
observe the section "For your
safety". ( 3.)
Also observe the "For your safety"
section in the instruction manual of
the ride-on mower.
If the ride-on mower with attached
snow plough is transported on a
load floor or a trailer, the snow
plough must always be in the
working position during transport.
Take account of the overall weight
when loading.
● Drive the ride-on mower onto the load
floor and engage the parking brake.
● Lower the snow plough to the working
position. ( 10.3)
● Secure the ride-on mower using
adequately-dimensioned fastening
materials (belts, ropes etc.).

16. Standard spare parts

Slide bar:
6907 731 8320
Skid:
6907 731 4710
34

17. Accessories

Note
For safe and better operation of the
ride-on mower during winter
(different external conditions),
additional accessories are
recommended.

17.1 Snow chains

Snow chains improve the traction of the
rear wheels on icy or snow-covered
surfaces.
Snow chains, 18 inches ASK 018:
6907 730 3431
Snow chains, 20 inches ASK 020:
6907 730 3436
Note
Note that the use of snow chains
can damage (scratch) the
underlying surface (flagstones,
asphalt, etc.).

17.2 Running wheels

Attaching the running wheels instead of
the skids to the snow plough prevents
scratches or other damage to the ground
caused by the skids (flagstones, driveways
etc.).
Set of running wheels:
6907 007 1035

18. Environmental protection

The machine, its packaging and
accessories are all produced
from recyclable materials and
must be disposed of
accordingly.
By disposing of materials separately and in
an environmentally-friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life.
19. CE - manufacturer's
declaration of conformity
We,
VIKING GmbH
Hans Peter Stihl-Strasse 5
A 6336 Langkampfen/Kufstein
declare that the machine,
coupling triangle and snow plough,
Coupling triangle:
manufacturer's VIKING
brand:
type: AKD 500.2
serial number 6907
Snow plough:
manufacturer's VIKING
brand:
type: ASS 125.1
serial number 6907
conforms to the following EC directives:
2006/42/EC
0478 907 9918 B - EN