EN
Problem
It is not possible to
lower the lever.
The capsule falls from its
compartment
The machine does not
dispense and both lights
of the pour push buttons
(5-6) blink in red.
The On/off button blinks
red/green.
The On/off button blinks
red.
11. Tips for a good coffee
•
In order to obtain a thicker and more persistent cream, use cups
with an inner ovoid-shape base.
58
10. Troubleshooting
The capsule is stuck or
badly positioned.
The compartment of
used capsules is full.
The lever is not com-
pletely raised.
there is a plastic capsule
or the capsule seat is
empty.
The machine requires a
descaling cycle.
No water in the tank.
Cause
Solution
Unplug the machine
from the power mains
and wait for it to cool
down; lift the lever and
remove the capsule
manually. Use a tool,
never use fingers.
Empty the compartment.
Completely lower the
lever and open it until it
gets to its end point.
Remove the plastic
capsule and insert a Bi-
aletti aluminium capsule,
press the pour push but-
tons (5-6) for 3 secs to
return to the dispensing
conditions.
Carry out a descaling cy-
cle as per paragraph 8.
Fill the tank and press
any button to exit the
alarm mode. Press the
espresso or long buttons
to repeat dispensing.