Tips For A Good Coffee; Energy Saving Mode - Bialetti Mokissima CF44 Instructions D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Place a cup onto the rack (5) underneath the nozzle of the capsule-holder drawer.
Press the button of dispensing start/stop
green light blinks.
To stop dispensing, press again the dispensing
Wait until the green light is steady, before removing the capsule-holder drawer and start another
dispensing.
AFTER USE, THE SURFACES OF THE DISPENSING UNIT AND
THE CAPSULE JUST USED ARE HOT. WARNING: BURN HAZARD.
AFTER DISPENSING, TAKE THE CAPSULE OUT AND RINSE THE CAPSULE HOLDER (4). SHAKE
AFTER RINSING TO REMOVE ANY RESIDUE OF WATER.
To dispense only water, insert the empty capsule-holder drawer (4) and start dispensing as in case
of capsules. After dispensing, wait until the green light is steady, before removing the cup containing
hot water.
THE DRIP TRAY (6) MAY BE FILLED WITH WATER AND/OR COF-
FEE: REGULARLY EMPTY IT BY REMOVING IT AND PUTTING
IT BACK IN ITS SEAT.
THE MACHINE STOPS DISPENSING AUTOMATICALLY AFTER
100 WORKING SECONDS FOR SAFEGUARDING THE INNER
PUMP.

4 ....TIPS FOR A GOOD COFFEE

For making a hotter coffee, pre-heat the cups by dispensing hot water from the empty fi lter holder
(without coffee).
Keep the capsules away from heat sources.
Do not use expired capsules (refer to the date on the packaging).
Use mineral water with low dry residue.

ENERGY SAVING MODE

This appliance was designed in compliance with the European Directives EC1275/2008 and 2009/125/
EC, stating the need to adopt the energy saving mode.
This appliance integrates an energy saving circuit, which activates after 10 minutes of inactivity. The ma-
chine turns off and the energy saving is below 0.5 W.
(Fig. F)
(8) to start dispensing
button (8).
UK
: during dispensing the
25

Publicité

Table des Matières
loading

Table des Matières