WHEN USING THE FIRST TIME
After removing the products from the box, make sure they are complete and all compo-
nents are present. Carefully wash the coffee maker before using it for the first time. Make
3 coffees and discard them.
Coffee Maker
Filling/preparation procedure
Unscrew the collecting unit.
•
Extract the funnel from the heater.
•
Pour the water into the heater up to the lower level of the safety valve.
•
Insert the funnel into the heater.
•
Fill the filter with moka ground coffee without pressing, avoiding to leave coffee powder
•
on the heater edge.
Screw back the collecting unit without taking it from the handle and place the coffee
•
maker on its power base.
Manual start:
Connect the base to a mains outlet.
•
•
Make sure to have previously prepared the coffee maker.
Press the button "11", the base goes on and starts heating, at the same time the tem-
•
perature maintenance function is activated and is shown on the display. The function ca
be disabled by pressing the button "9".
Press the button "11" again to stop the functioning.
•
When the coffee is ready, the base emits a sound to alert the user, the temperature
•
maintenance function is activated automatically and can be disabled by pressing the
button "9".
When the coffee is ready, an acoustic warning signal is activated.
•
The coffee is kept warm up to 30' from the base switching on.
•
•
To serve the coffee, lift the coffee maker off the base and pour its content into the coffee
cups.
Programmed start:
Connect the base to a mains outlet.
•
Make sure to have previously prepared the coffee maker.
•
•
To set the programmed start, it is necessary to set the correct time by following the
instruction in the paragraph "Clock Function".
After having set the time, press the MODE button:
•
Easy-Timer_IT-UK-FR-D-ES-PT.indd 19
4. Instructions for use
Instructions for use
EN
19
08/06/2018 15:02:48