Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Problem
The machine pre-heating
is very slow.
The coffee is watery,
without cream.
The button (1) blinks in
red and green.
The button (1) blinks in
red quickly.
10. Tips for a good coffee
•
Before making coffee for the first time, dispense some water only
in order to ensure the perfect dispensing; water does not disperse
heat inside the appliance and fluids encounter less resistance.
•
For a coffee at the optimal temperature, in case a cup-warmer is
not available, warm the cup up by dispensing only water.
•
In order to obtain a thicker and more persistent cream, use cups
with an inner ovoid-shape base.
40
9. Troubleshooting
There is a lot of limes-
cale in the machine.
The capsule has already
been used.
The tank (6) is not in-
serted properly or is not
inserted into its seat.
Machine malfunctioning.
Cause
Solution
Carry out a scale remov-
al cycle.
Repeat dispensing with a
new capsule.
Position the tank (6) into
its seat properly.
Press the button (1) for
more than 3 seconds to
switch the machine off.
Wait 20 seconds and
switch the machine on
again. If the problem
still occurs, contact
an authorised service
centre.
Publicité
Table des Matières
